Tuesday, August 13, 2013

DIY Tackboard


After my last home office update post (here) I talked about how the one thing my office was missing was a tackboard.  Over the weekend I got my act together and finally made my fabric covered tackboard.  I am no DIY diva but this is super easy and only took me a few hours and its a lot cheaper than the other fabric covered tackboards I was finding.

First- get your supplies!


30" x 42" x 5/8" Plywood 
1 yard of Fabric- I used Waverly Cross Section in Charcoal 
(3) 4-Pack Cork  12" x 12" Tiles
Leveler
Staple Gun
Picture Hangers
Monkey Hooks


Start by applying all of the cork tiles to the plywood board.  I bought Gorilla Glue to stick the cork tiles to the plywood but when I opened the cork tiles they came with adhesive stickers!




Layout the fabric, flip the board so it is cork-side down and begin pulling up the edges tight around the board and stapling.



Attach two picture hangers at the top of the board- each one approximately 6" in from the edge of the board.


I hung the board using (2) Monkey Hooks which are rated to each hold up to 35 lbs.  After it was hung I lightly ironed out any wrinkles in the fabric


Once you have it hung give yourself a pat on the back and start pinning!


My home office is now complete... for the moment :-)




Linking this post on...

The Blissful Bee




4 comments:

I love to read your comments! If you have a question leave me a comment and I'll be sure to answer or e-mail me at olivelaneinteriors@gmail.com

Related Posts Plugin for WordPress, Blogger...